SINOPEC Research Institute of Petroleum Engineering

Release Date：2024-09-10 Info. Source：Beijing Overseas Talents Center

Sinopec Research Institute of Petroleum Engineering (Engineering Institute) was established in 2009. It serves as the petroleum engineering high-tech research and development center (R&D), and the domestic and international petroleum engineering technology support center. It is engaged in the tasks of strategic planning, scientific research, product development and technology application in drilling, completion, logging, well testing, reservoir stimulation,CCUS and offshore petroleum engineering。It has led and participated in the construction of one national key laboratory, three national innovation platforms, seven Sinopec key laboratories, two industry key laboratories, and the joint "the Belt and Road" laboratory of China & Saudi Arabia for petroleum energy. It has 9 professional laboratories for rock mechanics, drilling and completion fluids, reservoir protection, cementing and downhole tools, etc. respectively; also 4 basic laboratories for analysis and evaluation of physical and chemical properties, rock core physical property testing and analysis, synthetizing and evaluation of additives, and electronic circuit testing, respectively.

No.	Specialization	Job Title	Number	Valid Through	Job Description	Age	Education	Qualifications	Supportting Policy and Benefits	Target Country/Region or Organization for the Candidate
1	PE	Corporate Chief Expert and above for Product R&D of Measurement While Drilling (MWD) and Control Equipment	2	2026/12/31	1.Responsible for the formulation and implementation of professional technical development plans for measurement-while-drilling (MWD) technology.2.In charge of the introduction and integration of new MWD technologies and systems, as well as independent research and development work.3.Manages the quality, schedule, cost, and HSE control of company-level and higher scientific research projects and product development.4.Responsible for writing major field application test or construction design plans.5.In charge of guiding the technical solutions of MWD instruments for various projects, providing corresponding professional technical support.6.Responsible for conducting in-depth research and analysis on the front line of the site and experiments, carrying out hands-on experiments, and completing other tasks assigned by senior leadership.	28-50	Doctor	1.Possess a profound background in multiple areas of knowledge related to measurement-while-drilling (MWD) technology, with an in-depth understanding of the current state of newer MWD technologies abroad, especially in MWD instruments and equipment. Have led the development projects of MWD instrument and equipment that have been applied on-site, with experience in the system architecture and design of MWD instruments and equipment.2.Have over 6 years of experience in the research and development of MWD equipment or related equipment, proficient in professional knowledge in the field of drilling and MWD.3.Proficient in using at least one mechanical design software and one circuit design software.4.Capable of leading a technical team in the research and development of MWD equipment products, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of MWD equipment.5.Meet one of the following conditions:(1) Have served as a professor, researcher, chief scientist, or equivalent position in renowned universities or research institutes both domestically and internationally, or as a senior professional and technical talent in internationally renowned companies, associations, or laboratories, with high academic achievements, published papers, or achieved significant scientific and technological results, having a certain influence in the MWD industry.(2) Have experience in the system architecture design and research and development of high-performance rotary steerable control instruments, high-temperature MWD instruments, or high-speed MWD transmission instruments (at least one of the three).(3) Possess extensive theoretical knowledge in reliability and environmental testing, durability analysis testing, testability design and verification, supportability design and verification, and other related areas.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
2	PE	Corporate Senior Expert and above for Product R&D of Intelligent Drilling	2	2026/12/31	1.Engage in the research and development of intelligent drilling products, responsible for the study of related fundamental theories, cutting-edge technologies, and the research on key technical challenges, and establish the technical direction for product development.2.Be in charge of or assist in the formulation and implementation of the development plan for intelligent drilling technology, carry out the compilation and revision of intelligent drilling standards and specifications, formulate intelligent drilling construction plans, and provide guidance for technical support and services.3.Conduct field tests and promote the application of intelligent drilling products to facilitate the transformation of research outcomes.4. Be responsible for the quality control of intelligent drilling products, continuously improving the reliability of the products.5.Be responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-50	Doctor	1.Have over 6 years of experience in the research and development of intelligent drilling, proficient in the professional knowledge of oil and gas well engineering and digital intelligence fields.2.Proficient in using at least one type of drilling engineering design software and one coding language.3.Possess rich experience in scientific research and practical field operations.4.Have the capability to lead a technical team in the research and development of intelligent drilling products, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of intelligent drilling products.5.Possess the ability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.6.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist of key research and development projects at the provincial and ministerial level or above.(2) Have served as the project leader for intelligent drilling projects and achieved good application results.(3) Have served as a professor, researcher, chief scientist, or equivalent position in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with high academic achievements, published papers, or achieved significant scientific and technological results, and have a certain influence in the field of intelligent drilling technology.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
3	PE	Corporate chief expert and above for product R&D of Intelligent Well Completion	2	2026/12/31	1.Responsible for the research and development of intelligent completion scientific projects and products, in charge of research on related fundamental theories, cutting-edge technologies, and key technical challenges, and establishing the technical development path for product development.2.Conduct the compilation and revision of intelligent completion standards and specifications, formulate intelligent completion construction plans, and provide guidance for technical support and services.3.Carry out field testing and promote the application of intelligent completion products to facilitate the transformation of research outcomes.4.Responsible for the quality control of intelligent completion products, continuously improving product reliability.5.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-50	Doctor	1.Possess a solid theoretical foundation and extensive practical work experience.2.Physically and mentally healthy, with a strong sense of responsibility, principle, and awareness of the bigger picture.3.Capable of mastering and applying professional software, and independently developing relevant functional modules.4.Have the ability to lead a technical team in the research and development of intelligent completion products, and be able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of intelligent completion products.5.Possess the capability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.6.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist of key research and development projects at the provincial and ministerial level or above.(2) Have served as the project leader for intelligent completion projects and achieved good application results.(3) Have served as a professor, researcher, chief scientist, or equivalent position in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of intelligent completion.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
4	PE	Corporate Senior Expert and above for product R&D of Intelligent Fracturing	2	2026/12/31	1.Responsible for the formulation and implementation of professional technical development plans for intelligent fracturing.2.In charge of the introduction and integration of new intelligent fracturing technologies, as well as independent research and development work.3.Responsible for conducting research on intelligent fracturing scientific projects and product development, in charge of research on related fundamental theories, cutting-edge technologies, and key technical challenges, and directing the research and development focus.4.Engage in the writing of product development, testing, maintenance, and full-process quality control standards for intelligent fracturing technology products.5.Formulate intelligent fracturing construction plans, carry out field tests and promote the application of the technology, and facilitate the transformation of research results.6.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior leadership.	28-50	Doctor	1.Possess a strong background in intelligent fracturing technology, with the ability to plan, design, and organize research topics in intelligent fracturing.2.Have extensive experience in scientific research and practical field operations.3.Strong in organization, coordination, leadership, and communication skills.4.Physically and mentally healthy, with a strong sense of responsibility, principle, and awareness of the bigger picture.5.Capable of mastering and applying professional software, and independently developing relevant functional modules.6.Have the ability to lead a technical team in the research and development of intelligent fracturing products, and be able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of intelligent fracturing products.7.Possess the capability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.8.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist of key intelligent fracturing research and development projects, and achieved good application results.(2) Have served as a professor, researcher, chief scientist, or equivalent position in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of intelligent fracturing technology.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
5	PE	Corporate Senior Expert and above for Digital and Intelligent Product R&D of Petroleum Engineering	2	2026/12/31	1.Responsible for the research and development of intelligent algorithms and products in the field of petroleum engineering.2.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-50	Doctor	1.Possess a strong background in intelligent fracturing technology, with the ability to plan, design, and organize research topics in intelligent fracturing.2.Have extensive experience in scientific research and practical field operations.3.Strong in organization, coordination, leadership, and communication skills.4.Physically and mentally healthy, with a strong sense of responsibility, principle, and awareness of the bigger picture.5.Capable of mastering and applying professional software, and independently developing relevant functional modules.6.Have the ability to lead a technical team in the research and development of intelligent fracturing products, and be able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of intelligent fracturing products.7.Possess the capability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.8.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist of key intelligent fracturing research and development projects, and achieved good application results.(2) Have served as a professor, researcher, chief scientist, or equivalent position in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of intelligent fracturing technology.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
6	PE	Corporate Senior Expert and above for Product R&D of Artificial Intelligence LLMS	2	2026/12/31	1.Responsible for the development of large-scale models in the field of petroleum engineering.2.Responsible for the construction of artificial intelligence platforms for petroleum engineering.3.Lead the research and development and testing of scenario large-scale models.4.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-50	Doctor	1.Thoroughly understand the principles of large-scale artificial intelligence models, with the capability to design and implement industry and scenario-specific large models.2.Proficient in the Python programming language and various machine learning algorithm frameworks.3.Possess a foundational knowledge and experience with databases.4.Have experience in the research and development of intelligent algorithms and data products in the field of petroleum engineering.5.Capable of product development in artificial intelligence, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of artificial intelligence products.6.Possess the ability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.7.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist of key research and development projects at the provincial and ministerial level or above.(2) Have served as the leader of artificial intelligence development projects and achieved good application results.(3) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of artificial intelligence.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
7	PE	Corporate Expert and above for Measurement While Drilling (MWD) and Control Equipment (Circuit System Design)	2	2026/12/31	1.Responsible for formulating the overall electrical system plan for measurement-while-drilling (MWD) instruments.2.In charge of the design and development of the electrical circuits and firmware for MWD instruments.3.Responsible for establishing the quality inspection standards and specifications for MWD instruments, assisting in the writing of manufacturing, maintenance, and full-process quality control standards.4.Participate in the field testing of MWD instruments.5.Responsible for providing professional technical support for various projects.6.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-45	Doctor	1.Have over 6 years of experience in the development of circuit systems for measurement-while-drilling (MWD) instruments.2.Proficient in at least one circuit design software and at least one embedded development system, capable of independently developing circuits and firmware.3.Possess the ability to write test specifications and standards for MWD instruments, able to guide the establishment of standards for the manufacturing, testing, and field use of MWD instruments.4.Have a strong background in MWD technology and be knowledgeable about the current state of MWD technology development domestically and internationally.5.Capable of MWD product development, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of MWD products.6.Possess the ability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.7.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key R&D projects of MWD instrument and achieved good application results.(2) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of MWD technology.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
8	PE	Corporate expert and above for Special Drilling and Completion Engineering	2	2026/12/31	1.Responsible for the research and development and technical problem-solving of downhole tool equipment such as coiled tubing and branch wells.2.Responsible for tracking market demands for downhole tools like coiled tubing and branch wells, conducting market outlook analysis and forecasting, and formulating commercial plans and technical proposals for product development.3.In charge of pilot and intermediate testing of downhole tools such as coiled tubing and branch wells to improve the quality level of prototypes.4.Responsible for on-site technical services and promotion of downhole tools such as coiled tubing and branch wells, reducing product failure rates, and meeting customer operation needs.5.In charge of the development planning and annual planning for professional, technical, and laboratory aspects of downhole tools such as coiled tubing and branch wells.6.Responsible for completing other tasks assigned by senior leadership.	28-45	Doctor	1.Have over 6 years of experience in the development of coiled tubing or branch well technology.2.Have the ability to lead a technical team in conducting research on coiled tubing or branch well technology, and be capable of overall grasp of the key technologies and tool development, field application, quality control, and cost management of coiled tubing or branch well technology.3.Proficient in at least one mechanical design software, capable of independently developing downhole tools.4.Capble of writing specifications and standards for coiled tubing or branch well technology, and be able to guide the establishment of standards for the manufacturing, testing, and field use of downhole tools.5.Have a strong background in petroleum engineering technology knowledge, and understand the current state of development of coiled tubing or branch well technology domestically and internationally.6.Possess the ability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.7.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key R&D projects of coiled tubing or branch wells, and achieved good application results.(2) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of coiled tubing or branch wells.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
9	PE	Corporate Expert and above for Product R&D of Special Drilling Fluid	2	2026/12/31	1.Responsible for the research and development of specialized drilling fluids and treatment agents. 2.Responsible for conducting research on cutting-edge and key technologies.3.In charge of coordinating the testing of new drilling fluid technologies and cooperating in the field trials of new technologies and products.4.Keep track of the development of the drilling fluid industry, academic discipline, and on-site technical needs, and grasp the direction of scientific research and problem-solving.5.Responsible for the formulation of professional, technical, and laboratory development plans and annual plans.6.Assist in the training and team building of talent in the field of specialized drilling fluid technology.7.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-45	Doctor	1.Proficient in professional knowledge such as oilfield chemistry, drilling fluid process principles, and oil and gas well engineering, with experience in research or field work related to drilling fluids.2.Proficient in API standards and national and industry standards in the field of drilling fluids and oilfield chemistry, with skilled operation of various instruments, equipment, and analytical software.3.Keep up with the forefront of technological development and significant technical demands in the field of drilling fluids or oilfield chemistry.4.Capable of researching and developing specialized drilling fluids, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of specialized drilling fluid products.5.Possess the ability to continuously reduce product failures, meet quality system standards, and enhance the reliability of new products.6.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key research and development projects in oilfield chemistry or drilling fluids, and achieved good application results.(2) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of oilfield chemistry or drilling fluid technology.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
10	PE	Corporate Expert and above for Product R&D of Special Cementing Fluid	2	2026/12/31	1.Responsible for the research and development of specialized cementing fluids and treatment agents.2.In charge of research on cutting-edge and key technologies.3.Responsible for coordinating trials of new cementing fluid technologies and cooperating in field trials of new technologies and products.4.Keep track of the development of the cementing fluid industry, academic disciplines, and on-site technical needs, and direct scientific research and problem-solving.5. Responsible for or assist in drafting professional, technical, and laboratory development plans and annual plans.6.Assist in the training and team building of talent in the field of specialized cementing fluid technology.7.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-45	Doctor	1.Proficient in professional knowledge such as oilfield chemistry, the principles of cementing fluid processes, and oil and gas well engineering, with experience in research or field work related to cementing fluids.2.Proficient in API standards and national and industry standards in the field of cementing fluids and oilfield chemistry, with skilled operation of various instruments, equipment, and analytical software.3.Keep up with the forefront of technological development and significant technical demands.4.Capable of researching and developing specialized cementing fluids, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of specialized cementing fluid products.5.Possess the ability to continuously reduce product failures, meet quality system standards, and enhance product reliability for new products.6.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key research and development projects in oilfield chemistry or cementing fluids, and achieved good application results.(2) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of oilfield chemistry or cementing fluid technology.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
11	PE	Product R&D Engineer for Geomechanics (Corporate Expert and above)	1	2026/12/31	1.Responsible for the team building of geological mechanics modeling for the needs of drilling and completion engineering.2.In charge of the development planning for geological mechanics modeling, scientific research project initiation, and product development for the needs of drilling and completion engineering.3.Responsible for establishing the processes, standards, operating procedures, and result publication mechanisms for geological mechanics modeling required for drilling and completion engineering.4.Responsible for the development of key software and modules for geological mechanics modeling.5.Lead the team to support the design and implementation of drilling and completion engineering in key areas and wells.6.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-45	Doctor	1.Have over 5 years of work experience in geological mechanics modeling, proficient in professional knowledge of oil and gas well engineering and the field of geological mechanics.2.Have the ability to lead a team in geological mechanics modeling work, including planning capabilities in the direction of geological mechanics modeling, project planning, design, and organizational skills, engineering support capabilities, and software development capabilities.3.Proficient in using at least one internationally popular geological modeling software/platform, with the ability to develop key software and modules.4.Have the capability for the research and development of geological mechanics products, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of geological mechanics products.5.Possess the ability to continuously reduce product failures for new products, meet quality system standards, and enhance product reliability.6.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key research and development projects at the provincial and ministerial level or above; and as the project leader for geological mechanics modeling projects, achieved results that have been recognized for their performance and have achieved good application effects.(2) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of geological mechanics modeling.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
12	PE	Product R&D Engineer for Rock Mechanics (Corporate Expert and above)	1	2026/12/31	1.Responsible for the development planning, scientific research project initiation, and product development of artificial intelligence technology for obtaining rock mechanics (including rock mechanics, in-situ stress, formation pressure, drillability, etc.).2.In charge of building a research team for artificial intelligence technology based on rock mechanics acquisition.3.Responsible for establishing methods, processes, and standard specifications for artificial intelligence technology in rock mechanics acquisition, as well as the development of analysis and presentation platforms/software.4.Responsible for the promotion and application of artificial intelligence technology for rock mechanics acquisition.5.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-40	Doctor	1.Have over 5 years of work experience in big data processing and artificial intelligence research, proficient in professional knowledge of oil and gas well engineering, petroleum engineering rock mechanics, and artificial intelligence fields.2.Have the ability to lead a team in the research and development and application of rock mechanics artificial intelligence acquisition technology, including direction planning capabilities, project planning, design, and organizational skills, engineering support capabilities, and software development capabilities.3.Proficient in applying internationally popular big data/artificial intelligence open-source algorithms, with the ability to process big data and develop key software and modules.4.Have the capability for rock mechanics product development, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of rock mechanics products.5.Possess the ability to continuously reduce product failures for new products, meet quality system standards, and enhance product reliability.6.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key research and development projects at the provincial and ministerial level or above; and as the project leader for rock mechanics artificial intelligence acquisition technology, achieved research results that have been recognized for their performance and have achieved good application effects.(2) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of rock mechanics and artificial intelligence.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
13	PE	Corporate Expert and above for Product R&D of Reservoir Stimulation Fluid	2	2026/12/31	1.Responsible for the research and development of reservoir stimulation fluid products.2.In charge of research on cutting-edge and key technologies.3.Responsible for coordinating the testing of new technologies for reservoir modification fluids, and cooperating in field trials of new technologies and products.4.Keep track of the industry and academic development of reservoir modification fluids, as well as on-site technical needs, and conduct research and exchanges.5.Keep track of the research trends and development directions of new processes, materials, and technologies for reservoir modification fluids, and participate in domestic and international academic exchanges.6.Participate in the formulation of development plans and annual plans for the process technology of reservoir modification fluids.7.Assist in the training and team building of talent in the field of reservoir modification fluid technology.8.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-45	Doctor	1.Proficient in professional knowledge such as oilfield chemistry, principles of reservoir stimulation processes, and oil and gas field development engineering, with experience in research or field work related to reservoir stimulation fluids.2.Proficient in API standards and national and industry standards in the field of reservoir stimulation fluids and oilfield chemistry, with skilled operation of various instruments, equipment, and analytical software.3.Keep up with the forefront of technological development and significant technical demands in the field of reservoir stimulation fluids or oilfield chemistry.4.Capable of researching and developing products for reservoir modification fluids, able to organize the design, development, manufacturing, testing, maintenance, quality control, and cost management of reservoir modification fluid products.5.Possess the ability to continuously reduce product failures for new products, meet quality system standards, and enhance product reliability.6.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key research and development projects in reservoir stimulation fluids and achieved good application results.(2) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally, or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of reservoir stimulation or oilfield chemistry technology.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
14	PE	Corporate Expert and above for Product R&D of Hydrogen Storage Technologies	2	2026/12/31	1.Responsible for the formulation and implementation of professional technical development plans for geological hydrogen storage.2.In charge of independent research and development of hydrogen storage technology and equipment, including hydrogen storage wells.3.Manages the quality, schedule, cost, and QHSE (Quality, Health, Safety, and Environmental) control of company-level and higher scientific research projects and product development.4.Responsible for writing engineering design schemes related to hydrogen storage.5.Conducts research and judgment on industry development trends, providing professional technical support for various projects.6.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-45	Doctor	1.Possess the ability to plan, design, and organize research projects for hydrogen storage devices.2.Have over 6 years of professional background in the relevant field, with the capability for scientific research, problem-solving, and independent product development, as well as rich practical experience.3.Have the R&D capability for hydrogen storage-related products, able to carry out design, development, manufacturing, testing, quality control, and cost management for such products.4.Possess the ability to continuously reduce product failures for new products, meet quality system standards, and enhance product reliability.5.Meet one of the following conditions:(1) Have served as the person in charge or chief technologist for key R&D projects in the fields of mechanical energy storage, geological hydrogen storage, hydrogen storage devices, etc.; Have been the leader of hydrogen storage (gaseous, liquid) engineering projects and achieved good application results.(2) Have served as a professor or researcher in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements and milestone scientific research results.(3) Have led or been the main person in charge of the R&D of hydrogen storage materials and devices, and achieved good application results.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office).2.Provide shuttle bus, and three meals.	No restrictions	Send
15	PE	Corporate Expert and above for Petroleum Engineering Strategic Planning and Research	2	2026/12/31	1.Undertake research on the development environment of the oil and gas industry, the oil and gas engineering market, and the strategic transformation of oil and gas companies. 2.Undertake research on company competitiveness evaluation, scientific and technological innovation management in petroleum engineering, technical and economic assessment, knowledge mining, and technical intelligence. 3.Undertake research and planning for the high-quality development strategy of petroleum engineering operations. 4.Responsible for conducting in-depth research and analysis on the front line and in the laboratory, carrying out hands-on experiments, and completing other tasks assigned by senior management.	28-45	Doctor	1.Have a background in management, intelligence, economics, operations research, natural sciences, or related disciplines. 2.Have research work experience in strategic research, planning, competitiveness evaluation, scientific and technological innovation management, technology foresight methods, technical and economic assessment, knowledge mining, and technical intelligence, with strong report writing and learning capabilities, capable of independently engaging in research on strategic planning methods and applications. 3.Be familiar with the energy industry, with an understanding of oil and gas and new energy technologies. 4.Have a passion for research work in this field, be highly motivated, diligent, and good at research. 5.Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutions both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements and a certain level of influence in strategic planning research. 6.Have experience in R&D projects at the provincial and ministerial level or above, and have published papers or achieved milestone results. 7.Have good foreign language skills in listening, speaking, reading, and writing, with the ability to communicate independently in an international context.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office). 2.Provide shuttle bus, and three meals.	No restrictions	Send
16	PE	Corporate Expert and above for R&D of Petroleum Engineering Software (Digital Twin)	1	2026/12/31	1.Responsible for the selection and architectural design of 3D visualization technology in different application scenarios. 2.In charge of the development of shared components for underground 3D visualization, system integration, and application training. 3.Responsible for the organization and implementation of projects related to 3D digital representation.	28-45	Doctor	1.Possess solid professional knowledge in the oil and gas field. 2.Master 3D visualization development technology, proficient in front-end 3D development technologies such as WebGL, VTK, or proficient in 3D visualization technology based on the UE engine. 3.Have the capability to develop 3D visualization software in the oil and gas field, with over 8 years of experience in 3D development for surface or underground applications. 4.Familiar with the R&D process of digital twin products, able to participate in the design, development, manufacturing, testing, maintenance, quality control, and cost management of digital twin products. 5.Possess the ability to continuously reduce product failures for new products, meet quality system standards, and enhance product reliability. 6.Meet one of the following conditions: (1) Have served as the person in charge or chief technologist for key R&D projects at the provincial and ministerial level or above. (2) Have served as the leader of digital twin development projects and achieved good application results. (3) Have served as a professor, researcher, chief scientist, or equivalent in renowned universities and research institutes both domestically and internationally , or as a senior professional and technical talent in internationally renowned enterprises, associations, or laboratories, with significant academic achievements, published papers, or achieved milestone scientific and technological results, and have a certain influence in the field of digital twins.	1.Provide single apartment located in Beijing Shahe area (5mins walk distance from office). 2.Provide shuttle bus, and three meals.	No restrictions	Send

Please click download for job details: View available positions.xls

Beijing Overseas Talents Center